| 1) |
The
size and configuration of the locker compartment will be determined
by the items to be stored e.g. the need to hang garments,size
of bags/holdalls,the storage of motor cycle helmets and footwear
etc. |
| 2) |
Is
there a need to store workwear separately from personal clothing
if so then PPE or Clean/Dirty locker options are available. |
| 3) |
If
hygiene is important consider a factory fitted sloping top
option on lockers. This prevents an unwanted build up of dirt
and debris and also encourages storage within the locker and
not outside. locker stands can provide cleaning access to
beneath the locker. |
| 4) |
Check
floor surfaces are level, lockers are designed to be floor
standing. To overcome uneven floors locker stands are supplied
with adjustable feet. |
| 5) |
Will
users be changing footwear?, it would be useful to offer freestanding
benches or an integral seat and stand option. |
| 6) |
Is
there a need to air damp clothing?, then consider lockers
where garments can be hanged or opt for a compartment locker
with perforated holes in doors to increase air circulation. |
| 7) |
Type
of lock required - key camlock, padlock type fitting, £1
coin or token return lock options available. |
| 8) |
Additional
locker accessories e.g hanging rail, sloping top, number plates
etc. |
| 9) |
Is
there a need for locker compartments to be visually monitored.
Perforated doors allow inspection from outside the locker. |
| 10) |
factors
relating to the positioning and off-loading of lockers should
be considered e.g. will labour be required. Neested lockers
are more difficult to manoeuvre than single lockers. |
| 11) |
Check
if delivery vehicle access is sufficient. |
| 12) |
Coloured
door requirements. |
| General
Info:- |
Metal
lockers are not intended for use in damp or wet areas. Under
the Workplace ( Health, Safety and Welfare regulations 1992
) employers are required to provide suitable and sufficient
accommodation for workwear and personal clothing. The Personal
Protective Equipment at work regulations 1992 also require
the provision of suitable storage to protect personal protective
equipment from damage, contamination or loss. |
